Plasti Dip is a rubbery coating made to bond to most surfaces, and is commonly used on handles for tools. It’s meant to stand up to outdoor applications and extreme temperatures, and it can extend the life of metal surfaces by protecting them from moisture. In addition to adding some color, there are lots of other practical uses for Plasti dip. Here are a few of my favorites.
By far the most common application for Plasti Dip is tool handles. For this application, using the traditional dip container of Plasti Dip to coat tool handles is the best approach. In addition to adding color, Plasti Dip is an insulator against electricity and heat, making metal tools safer and more comfortable to use. For a smooth finish, you should set up a way to hold your tools in place while the handles dry. For this step, you can use a clamp or even a clothesline with some clips.
Knobs on equipment like adjustable-height tables, tool accessories, and clamps can all be coated with Plasti Dip to make them more comfortable to use. You can also use Plasti Dip on knobs for cabinet hardware, doorknobs, and drawer pulls to give an older knob some new life or to make them easier to grip. For best results, take the handles completely off and dip them without submerging the hardware that attaches them to your furniture or equipment. Steer clear of applying Plasti Dip to any moving parts or to the surfaces of screws and bolts.
To use Plasti Dip successfully on car parts, you will need the rattle can, spray-on type to cover the areas you want to target. You can also choose to use a paint sprayer with the type of Plasti Dip meant for sprayers for larger areas, although applying this type of paint does take some practice to get it right. For smaller areas, like splash guards inside your wheel well or rims, you can use a spray can after cleaning the surface thoroughly with soapy water and masking off the surrounding areas that you don’t want to get paint on. Plasti Dip can help to protect the undercarriage of your vehicle from rust, and it can also improve the look of your rims. For a more professional-looking finish, you can choose an automotive kit that comes with a specialized spray nozzle and a glossy finish spray.
To give the bottom of your carpet a non-slip coating, you can use super grip Plasti Dip spray. Prep the surface by vacuuming the rug and use a drop cloth outdoors to apply the coating. Make sure to tape off the edges of your rug as well as any tassels to avoid accidentally spraying them. Once the coating is dry, your rug will no longer slide about, preventing tripping and slipping accidents.
For use on almost any type of glass, from jelly jars to windows, clear Plasti Dip can be applied for a safety coating. In addition to providing a little bit of resistance to breakage for glass bottles, a Plasti Dip coating will hold shards of glass together in the event the glass is broken, reducing the danger. Applying Plasti Dip to glass needs proper ventilation and masking, but you should also make sure that the glass can dry in a fairly low wind environment to get the best possible finish. Be aware that using Plasti Dip to coat glass, even if it’s clear, will at least partially obscure the glass—it isn’t a fully transparent layer.
